English
España
русскийsolution
Bar Screen
The bar Screen is perfectly suited to both municipal and industrial waste water, and process water screening. The cleaning elements, attached to the chain system, can easily be adjusted to different requirements. These elements are rake tooth and brushes. Each chain is driven by a sprocket on a common shaft and a flange mounted gear motor. If the screen operation is blocked, a mechanical over load protection interrupts the operation.
Benefits:
*Very low head loss ,high separation efficiency.
*Compact design with a low installation height above ground level.
*The teeth belt cleaning the screening continuously and cut down most of the polluting load.
*The screen consists of a self-supporting folded stainless steel profile so that it caneasily be lofted out of the channel.
*Simple and easy-to-access chain tensioning unit.
*All parts in contact with medium are made of stainless steel.
*High screening discharge capacity through adjustable cleaning elements.
|
Model |
Installation angle |
Speed |
Channel Width |
Channel Depth |
Machine Width |
Media |
Power |
|
CWBS3 |
60°-- 80° |
2M/min |
400 |
1000-
12000mm |
300 |
≤85° |
0.37kw |
|
CWBS4 |
600 |
500 |
0.55kw |
||||
|
CWBS5 |
800 |
700 |
0.55kw |
||||
|
CWBS6 |
1000 |
900 |
0.75kw |
||||
|
CWBS7 |
1200 |
1100 |
1.1kw |
||||
|
CWBS8 |
1400 |
1300 |
1.1kw |
||||
|
CWBS9 |
1600 |
1500 |
1.5k |
1. During operation, if there is fiber debris blocking the tooth rake chains, clean up it timely to avoid affecting its normal operation.
2、During the normal operation, use grease gun to inject grease into lubricating nipples every two months.
3、Regularly replace reducer lubricating oil. For ordinary equipment which is in operation for half a month, it need changing new oil. Afterwards, change its oil every three months. At ordinary times, pay attention to the reducer oil level.
